Schäffer 4670 Z

Standard equipment wheel loader 4670 Z

• 4-cylinder diesel engine Kubota V2403-CR-T, 48.6 kW (66 HP)
• DOC and DPF for compliance with Stage V emissions standards
• Hydrostatic four wheel drive with automotive control
• High-pressure drive HD-plus
• Tyres 11.5/80-15.3 AS, offset +40
• HTF (High Traction Force)
• SPT (Schäffer Power Transmission)
• ECO Mode
• Hydraulic quick gear 20 km/h switchable under load
• Original Schäffer planetary axles with self-locking differentials, wide design 6 hole
• Combined oil cooler
• Multiple disk brake, maintenance free; service and parking brake
• Maintenance free articulated pendulum joint
• Restraining system for protection roof
• LED working headlights on protection roof version: 1 x on the boom; cabin version: 2 x front, 1 x rear
• Z-bar boom with parallel lift
• Additional control device electrically switchable on joystick
• Working hydraulics: 76 l/min / 70 + 46 l/min (double gear pump) / 115 l/min (MHF)
• Adjustable steering column
• Hour meter, rev, counter, fuel control lamp and temperature indicator
• Armrest right hand side
• Rear weight end plate
• Main battery switch (cab version)
• Wide chassis
• Driver-on-board switch
• Headstock type wheel loader with hydraulic tool lock

Technical data wheel loader 4670 Z

• Engine
  • Type: 4-cylinder diesel engine Kubota V2403-CR(-T)
  • Capacity / option: 48.6 kW (66 HP)
  • Exhaust gas treatment / emission level: DOC, DPF, Stage V
• Tyres
  • Standard tyres: 11.5/80-15.3 AS, ET+40
  • Option I: 15.0/55-17
  • Option II: 425/55-17
  • Option III: 33×15.5-16.5 SKD, ET+35
• Electric system
  • Operating voltage: 12 V
• Sounds and vibration
  • Sound pressure level LpA: 85 db(A)
  • Sound power level guaranteed LwA: 101 db(A)
  • Sound power level equivalent LwA: 100 db(A)
  • Hand/arm vibration acc. to ISO 8041: <2,5 m/s²
  • Total body vibration acc. to ISO 8041: <0,5 m/s²

• Drive
  • Traction hydraulics: Hydrostatic-automotive
  • Axles: Original Schäffer axles, 6 wheel nut rim; planetary axle and automatic limited slip brake
  • Speed / option: 0 – 20 kph, 2 speeds gear switching under load possible / 0 – 30 kph
• Brakes and steering
  • Service braking system: Combined brake hydrostatic and multi-disc brake
  • Parking brake: Multi-disc brake running in oil bath
  • Steering: Fully hydraulic articulated/swivel steering
• Tank capacity
  • Fuel: 70 l
  • Hydraulic oil: 95 l
• Dimensions
  • (A) Wheelbase: 2,000 mm
  • (B) Chassis length: 4,080 mm
  • (C) Overall length with standard bucket: 4,760 mm
  • (D) Digging depth: 120 mm
  • (E) Max. working height: 4,060 mm
  • (G) Loading height with pallet forks: 3,050 mm
  • (H) Max. dumping height: 2,500 mm
  • (I) Front end height: 1,570 mm
  • (J) Dumping width: 640 mm
  • (K) Seat height: 1,270 mm
  • (L) Protective roof height: 2,270 mm
  • (L) Cab height: 2,270 mm
  • (M) Max. bucket pivot point: 3,260 mm
  • (N) Overall width / option: 1,420 (1,580 turned) / 1,420 – 1,730 mm
  • (O) Inner turning radius: 1,425 mm
  • (P) Outer turning radius: 2,845 mm
  • (Q) Outer radius with standard bucket: 3,175 mm

• Working hydraulics
  • Delivery rate: 76 l/min / 70 + 46 (double gear pump) l/min / 115 (MHF) l/min
  • Operat. pressure: 210 bar
• Weights
  • Operating weight protective roof incl. Original tyres, driver and standard bucket: 3,400 kg
  • Operating weight cabin incl. Original tyres, driver and standard bucket: 3,520 kg
  • Lifting capacity: 2,400 kg
  • Tipping load, straight, pallet fork acc. to ISO 8313: 1,823 – 2,149 kg
  • Tipping load, straight, bucket acc. to ISO 8313: 2,120 – 2,428 kg
  • Tipping load, articulated, pallet fork acc. to ISO 8313: 1,700 kg
  • Tipping load, articulated, bucket acc. to ISO 8313: 1,950 kg
  • Payload, pallet fork, even ground acc. to EN 474-3: 1,136 kg
  • Payload, pallet fork, uneven ground acc. to EN 474-3: 852 kg
  • Payload bucket acc. to EN 14397-1: 880 kg
• Transport of materials
  • Specific material weight: 1,6 t/m³
  • Bucket volume acc. to ISO 8041: 0,55 m³
  • Recommended bucket width: 1,3 m