Schäffer 24e

Standard equipment electric loader 24e

• Electric motor drive: 21 kW; electric motor working hydraulics: 9,7 kW
• Low version front carriage for best lifting force
• Electric four wheel drive with cardan shaft
• Li-Ion battery pack, 260 V / 15.65 kWh (31.3 kWh on option)
• On-board charger with Type 2 connector enables charging at a 230V power outlet (3 kW) or a wallbox (11 kW)
• Charging cable type 2 / CEE 16 A, 4 m
• Battery management system
• Energy recuperation
• Hill-Hold funktion: ?start up assistant? to make hill starts easier
• Tyres 10.0/75-15.3 MPT, offset +40
• 20 km/h
• Eco mode to extend the operating time
• Genuine Schäffer axle, 6 hole
• Water cooling of electric motors
• Multiple disk brake, maintenance free; service and parking brake
• Maintenance free articulated pendulum joint
• Restraining system for protection roof
• LED working headlights on protection roof version: 1 x on the boom; cabin version: 2 x front, 1 x rear
• Acoustic reverse warning signal (can be switched off)
• Parallel lift
• Electronically operated additional controller
• SilencePlus gear pump, especially quiet
• Working hydraulics: 42 l/min
• Adjustable steering column
• Hour meter, range display and charging status display
• Counter weight 100 kg mounted under rear chassis
• Rear weight end plate
• Main battery switch
• Tool Box
• Driver-on-board switch
• Quick-change frame SWH with hydraulic tool lock

Technical data electric loader 24e

• Engine
  • Output: 21 kW
  • Working hydraulics: 9,7 kW
• Tyres
  • Standard tyres: 10.0/75-15.3 MPT, ET+40
  • Option I: 27×10.5-15 SKD, ET+40
  • Option II: 31×15.5-15 SKD, ET-37
• Electric system
  • Operating voltage: 12 V
• Sounds and vibration
  • Sound pressure level LpA: 64 db(A)
  • Sound power level guaranteed LwA: 99 db(A)
  • Sound power level equivalent LwA: 90 db(A)
  • Hand/arm vibration acc. to ISO 8041: <2,5 m/s²
  • Total body vibration acc. to ISO 8041: <0,5 m/s²

• Drive
  • Traction hydraulics: 4-wheel-drive, fully electric
  • Axles: Original Schäffer axles, 6 wheel nut rim
  • Speed: 0 – 20 kph
• Brakes and steering
  • Service braking system: Combined brake hydrostatic and multi-disc brake
  • Parking brake: Multi-disc brake running in oil bath
  • Steering: Fully hydraulic articulated/swivel steering
• Tank capacity
  • Hydraulic oil: 15 l
• Dimensions
  • (A) Wheelbase: 1,755 mm
  • (B) Chassis length: 3,320 mm
  • (C) Overall length with standard bucket: 4,045 mm
  • (D) Digging depth: 105 mm
  • (E) Max. working height: 3,230 mm
  • (G) Loading height with pallet forks: 2,360 mm
  • (H) Max. dumping height: 1,700 mm
  • (I) Front end height: 1,490 mm
  • (J) Dumping width: 260 mm
  • (K) Seat height: 1,160 mm
  • (L) Protective roof height: 2,190 mm
  • (L) Cab height: 2,140 mm
  • (M) Max. bucket pivot point: 2,500 mm
  • (N) Overall width / option: 1,020 (1,200 turned) – 1,030 – 1,570 mm
  • (O) Inner turning radius: 1,310 mm
  • (P) Outer turning radius: 2,330 mm
  • (Q) Outer radius with standard bucket: 2,710 mm

• Working hydraulics
  • Delivery rate: 42 l/min
  • Operat. pressure: 180 bar
• Weights
  • Operating weight protective roof incl. Original tyres, driver and standard bucket: 2,215 kg
  • Operating weight cabin incl. Original tyres, driver and standard bucket: 2,280 kg
  • Lifting capacity: 1,900 kg
  • Tipping load, straight, pallet fork acc. to ISO 8313: 1,610 – 1,749 kg
  • Tipping load, straight, bucket acc. to ISO 8313: 1,690 – 1,935 kg
  • Tipping load, articulated, pallet fork acc. to ISO 8313: 1,140 kg
  • Tipping load, articulated, bucket acc. to ISO 8313: 1,470 kg
  • Payload, pallet fork, even ground acc. to EN 474-3: 912 kg
  • Payload, pallet fork, uneven ground acc. to EN 474-3: 684 kg
  • Payload bucket acc. to EN 14397-1: 735 kg
• Transport of materials
  • Specific material weight: 1,6 t/m³
  • Bucket volume acc. to ISO 8041: 0,45 m³
  • Recommended bucket width: 1,3 m