Schäffer 2430

Standard equipment wheel loader 2430

• 3-cylinder diesel engine Kubota D1703-M-Di, 18.5 kW (25 HP)
• Low version front carriage for best lifting force
• Highest torque due to 1.7 l cylinder capacity
• Hydrostatic four wheel drive with cardan shaft and automotive control
• High-pressure drive HD-plus
• Tyres 10.0/75-15.3 MPT, offset +40
• HTF (High Traction Force)
• SPT (Schäffer Power Transmission)
• Hydraulic quick gear 20 km/h
• Genuine Schäffer axle, 6 hole
• Combined oil cooler
• Multiple disk brake, maintenance free; service and parking brake
• Maintenance free articulated pendulum joint
• Restraining system for protection roof
• LED working headlights on protection roof version: 1 x on the boom; cabin version: 2 x front, 1 x rear
• Parallel lift
• Mechanically operated additional controller
• Working hydraulics: 42 l/min
• Adjustable steering column
• Hour meter, fuel control lamp and temperature indicator
• Case weight
• Rear weight end plate
• Tool Box
• Driver-on-board switch
• Quick-change frame SWH with hydraulic tool lock

Technical data wheel loader 2430

• Engine
  • Type: 3-cylinder diesel engine Kubota D1703-M-Di
  • Output: 18.5 kW (25 HP)
  • Exhaust gas treatment / emission level: – / V
• Tyres
  • Standard tyres: 10.0/75-15.3 MPT, ET+40
  • Option I: 27×10.5-15 SKD, ET+40
  • Option II: 31×15.5-15 SKD, ET-37
• Electric system
  • Operating voltage: 12 V
• Sounds and vibration
  • Sound pressure level LpA: 85 db(A)
  • Sound power level guaranteed LwA: 101 db(A)
  • Sound power level equivalent LwA: 101 db(A)
  • Hand/arm vibration acc. to ISO 8041: <2,5 m/s²
  • Total body vibration acc. to ISO 8041: <0,5 m/s²

• Drive
  • Traction hydraulics: Hydrostatic-automotive
  • Axles: Original Schäffer axles, 6-hole rim
  • Speed: 0 – 20 kph
• Brakes and steering
  • Service braking system: Combined brake hydrostatic and multi-disc brake
  • Parking brake: Multi-disc brake running in oil bath
  • Steering: Fully hydraulic articulated/ swivel steering
• Tank capacity
  • Fuel: 40 l
  • Hydraulic oil: 30 l
• Dimensions
  • (A) Wheelbase: 1,645 mm
  • (B) Chassis length: 3,140 mm
  • (C) Overall length with standard bucket: 3,830 mm
  • (D) Digging depth: 105 mm
  • (E) Max. working height: 3,230 mm
  • (G) Loading height with pallet forks: 2,150 mm
  • (H) Max. dumping height: 1,700 mm
  • (I) Front end height: 1,490 mm
  • (J) Dumping width: 260 mm
  • (K) Seat height: 1,190 mm
  • (L) Protective roof height: 2,190 mm
  • (L) Cab height: 2,140 mm
  • (M) Max. bucket pivot point: 2,500 mm
  • (N) Overall width / option: 1,020 (1,200 turned) / 1,090 – 1,300 mm
  • (O) Inner turning radius: 1,170 mm
  • (P) Outer turning radius: 2,190 mm
  • (Q) Outer radius with standard bucket: 2,480 mm

• Working hydraulics
  • Delivery rate: 42 l/min
  • Operat. pressure: 200 bar
• Weights
  • Operating weight protective roof incl. Original tyres, driver and standard bucket: 2,200 kg
  • Operating weight cabin incl. Original tyres, driver and standard bucket: 2,400 kg
  • Lifting capacity: 1,900 kg
  • Tipping load, straight, pallet fork acc. to ISO 8313: 1,272 – 1,521 kg
  • Tipping load, straight, bucket acc. to ISO 8313: 1,530 – 1,740 kg
  • Tipping load, articulated, pallet fork acc. to ISO 8313: 900 kg
  • Tipping load, articulated, bucket acc. to ISO 8313: 1,180 kg
  • Payload, pallet fork, even ground acc. to EN 474-3: 720 kg
  • Payload, pallet fork, uneven ground acc. to EN 474-3: 540 kg
  • Payload bucket acc. to EN 14397-1: 590 kg
• Transport of materials
  • Specific material weight: 1,6 t/m³
  • Bucket volume acc. to ISO 8041: 0,42 m³
  • Recommended bucket width: 1,1 m